Created On:  |Updated: | Leave a comment
Pin
Share
Tweet
Jump to Recipe Print Recipe
Turn heart-shaped cards from Michaels into the perfect DIY Valentine’s Day Garland with the help of the Cricut Maker!
I wanna be that cool chick who decorates my mantel for every holiday – but Valentine’s Day always had me stumped. Until I came across some heart shaped cards from Michaels! I grabbed a few packs, turned on my cutting machine, and in less than 15 minutes I had a DIY Valentine’s garland that I’m proud to display!
Also, if that is not enough, I’m thrilled to be joining 43 other makers to celebrate Valentine’s Day with some DIY projects – I’m sharing all of them at the end of this post so be prepared to be inspired!
{FTC Disclosure: This post contains affiliate links which means I may make a small commission on any purchase at no additional cost to you. Thanks for supporting my small business!}
SUPPLIES NEEDED:
- Heart Cards and Envelopes (I got mine from Michaels)
- Cricut machine – I used the Maker but this could be done with any of the Explore machines as well!
- Xyron Mega Runner
- twine
- scissors
- white glitter cardstock (not pictured)
- foam dots (not pictured)
NOTE: If you can’t find heart shaped cards, you could also fold a piece of scrapbook paper or construction paper in half and cut out a heart shape on the top of the fold line.
Ordering from cricut.com? Use code CRICUTCREATORS10 for 10% off and FREE shipping on any order over $50. Includes sale and clearance prices, does not include machines (anything with a plug). Cricut items can also be found at HSN, Amazon, and JOANN stores.
Do you want to order your Xyron products from amazon.com? Then check out my Adhesives & Fixatives page!
HOW TO MAKE SIMPLE HEART GARLAND:
1. Open the card and lay the twine across the fold.
2. Use your Mega Runner to apply some adhesive at the top of the heart and at the bottom.
NOTE: If you don’t have a Mega Runner or Tape Runner, you can also use a glue stick instead.
3. Fold the card closed.
4. Cut your XO images from glitter cardstock. I used a file in Design Space.
5. Add foam tape to the back of each letter and adhere.
Note: If you don’t want to add XO to your paper hearts, you could decorate them in other ways. For example, you could use hot glue to add pom poms, a different type of paper, ribbons, fabric, and more! Also, if you like the heart look, you could add layers of hearts onto each main heart to give the garland more dimension.
And voila!
This project is such a fun take on a paper heart garland and it pairs so well with a felt ball garland or yarn pom pom garland on a mantel!
For my mantel setup, I hung this DIY Valentine garland using regular tape, but you could use Command Hooks instead. Then, after the heart garland was secure, I layered in my DIY Pom Pom Garland and a red and white pom pom/tassel garland.
I have a full tutorial for the DIY Pom Pom Garland that you can see here if you want to learn more. However, I don’t have a tutorial for the red and white pom pom/tassel garland. Instead, if you like that look, you can check out my DIY Garland Decoration With Yarn tutorial, where I show you how to make a tassel garland and a braided garland. In that tutorial, the garland is created with yarn from Bernat in the colors of Frosted Pine, Sea Spray, and Surf, which are basically different shades of blue. So, if you are making the tassel garland or braided garland for Valentine’s Day, you can easily swap out the yarn colors and use red, pink, white, or pastels instead.
No matter what you do, just add ”make a Valentine’s Day garland” to your to-do list, because, trust me, you will have so much fun!
43 VALENTINE’S DAY PROJECTS:
If you are looking for more Valentine’s ideas, then don’t miss this Link Up!
In this Link Up, there are 43 easy DIY projects that inculde Valentines Day decor, cards, gifts, and more! Plus, all of these fun easy DIYs include step-by-step instructions, and some of them even have free printables!
To see all of the projects, click the link below and a separate page will pop up with all 43 projects. From there, you can click on the project you want to learn more about.
Print This Pin This Rate This
Easy To Make DIY Valentine’s Day Garland
Turn heart-shaped cards from Michaels into the perfect DIY Valentine’s Day Garland with the help of the Cricut Maker!
Author: Beth Kingston
Materials
- Heart Cards and Envelopes (I got mine from Michaels) If you can’t find heart shaped cards, you could also fold a piece of scrapbook paper or construction paper in half and cut out a heart shape on the top of the fold line.
- Cricut machine – I usedthe Makerbut this could be done with any of theExplore machinesas well!
- Xyron Mega Runner
- twine
- scissors
- white glitter cardstock
- foam dots
Instructions
Open the card and lay the twine across the fold.
Use your Mega Runner to apply some adhesive at the top of the heart and at the bottom.
NOTE: If you don’t have a Mega Runner or Tape Runner, you can also use a glue stick instead.
Fold the card closed.
Cut your XO images from glitter cardstock. I usedthis filein Design Space.
Add foam tape to the back of each letter and adhere.
Note: If you don’t want to add XO to your paper hearts, you could decorate them in other ways. For example, you could use hot glue to add pom poms, different type of paper, ribbons, fabric, and more! Also, if you like the heart look, you could add layers of hearts onto each main heart to give the garland more dimension.
IF YOU ARE LOOKING FOR ANOTHER VALENTINE’S DAY PROJECT, CHECK OUT THIS ONE!
Pin
Share
Tweet
Related
Join The Email Club!
Want the latest crafts, fun projects, recipes + more? Subscribe below!
Reader Interactions
Share Your Thoughts
This site uses Akismet to reduce spam. Learn how your comment data is processed.
